Reading Port Process Values; Table 42 Port-Specific Configuration Parameters; Table 43 Port-Specific Process Data Of The Digital Inputs And Outputs - WAGO 765-1103/100-000 Manual

Commissioning
Node Name
OverCurrentPin1
OverCurrentPin2
OverCurrentPin4
UnderCurrentPin1
UnderCurrentPin2
UnderCurrentPin4

10.3.3.1.4 Reading Port Process Values

The OPC UA server provides nodes with process data. For example, the OPC UA client
can read out the value on pin 4 of a port in the Pin4ProcessData node.
Process Data of the Digital Inputs and Outputs
The path to this node is:
Root > Object > DeviceSet > [device name] > DigitalConnector >
PortXX > SIOProcessData
Note
OPC UA client can only read process output data
The process output data is written by the PROFINET IO-Controller. The OPC UA client
can only read process output data.
The following table lists port-specific process data of the digital inputs and outputs.
Node Name
Pin2ProcessData
Pin4ProcessData
78 Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
Node Class Access Default Description
Variable Read 0
Variable Read 0
Variable Read 0
Variable Read 0
Variable Read 0
Variable Read 0
Table 43: Port-Specific Process Data of the Digital Inputs and Outputs
Node Class Access
Variable Read
Variable Read
765-1103/100-000
Table 42: Port-Specific Configuration Parameters
Warning level for current upper limit on pin 1;
unit: 1 mA
0: monitoring not enabled
Warning level for current upper limit on pin 2;
unit: 1 mA
0: monitoring not enabled
Warning level for current upper limit on pin 4;
unit: 1 mA
0: monitoring not enabled
Warning level for current lower limit on pin 1; unit:
1 mA
0: monitoring not enabled
Warning level for current lower limit on pin 2; unit:
1 mA
0: monitoring not enabled
Warning level for current lower limit on pin 4; unit:
1 mA
0: monitoring not enabled
Description
Process data on pin 2
Process data on pin 4