Table 39 Input Options For Forcing For Each Pin Of A Port - WAGO 765-1103/100-000 Manual

Commissioning
You have three options for each pin that supports the forcing function:
Option
Forcing – substitute value bit is set
(1)
Forcing – substitute value bit is
deleted (0)
No forcing for this pin
For entering these, there are two checkboxes in the table for each pin of a port: force for
switching the forcing functionality on/off, and set/clr for setting or deleting the setpoint
(1 bit); the latter checkbox is only relevant if the force box is checked. The following ap-
plies to this:
• All inputs for input simulation are entered in the right half of the table under "Input
process data"; all the inputs for output forcing are then entered in the left half of the ta-
ble under "Output process data."
You can find a description of and more information on the forcing function and explana-
tions of terms under
Each of the eight ports (X01 ... X08) has its own table row.
• For pin 4, there is always the option of forcing. Whether forcing is also possible for pin
2 depends on the current configuration of pin 2. Pin 2 must be configured as a digital
input to force the input process data and as a digital output to force the output process
data.
This determines whether or not the pin 2 checkboxes are editable, and Pin 2 or No pin
2 is used as the column title in the screen form.
74 Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
Figure 26: DIO Forcing Menu Item, "DIO Forcing" Screen (Example View)
Table 39: Input Options for Forcing for Each Pin of a Port
"Force" Checkbox
Checked
Checked
Not checked
8 Forcing
[} 25].
765-1103/100-000
"Set/Clr" Checkbox
Checked
Not checked
No meaning