Table of Contents
Advertisement
VERSION 12/2018
2
CORRECT USE
2.1
DEVICE TYPE
Automatic gun for automatic coating of work pieces.
GA 250AL
GA 400AL
2.2
TYPE OF USE
The spray gun is suitable for atomizing liquid products, particularly coating products, using
the Airless process:
Non-ignitable products.
Ignitable products.
WAGNER explicitly prohibits any other use!
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
2.3
FOR USE IN POTENTIALLY EXPLOSIVE AREAS
The device is suitable for use in potentially explosive areas as defined in Directive 2014/34/EU
(ATEX), (see Explosion protection marking Chapter 3.1).
2.4
PROCESSIBLE WORKING MATERIALS
Top-coat lacquers, primer paints, corrosion protection, textured lacquers, lyes, staining solvents,
clear lacquers, separating agents, etc. with a solvent or water base. If you want to spray working
materials other than the aforementioned, contact a WAGNER representative.
Note:
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter application
problems.
2.5
MISUSE
Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
no dry coating products, e.g. powder are processed;
no food, medicine or cosmetics are processed.
It is important to note that the device's materials are not food-safe.
ORDER NUMBER DOC 350941
GA 250AL_GA 400AL
9
Advertisement
Table of Contents
