Table of Contents
Advertisement
VERSION 02/2019
2
CORRECT USE
2.1
DEVICE TYPE
Manual gun for manually coating work pieces.
Topfinish GM 1030P
2.2
TYPE OF USE
The spray gun is suitable for atomizing liquid products, particularly coating products,
using the Airspray process:
– Non-ignitable products.
– Ignitable products.
WAGNER explicitly prohibits any other use!
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
2.3
FOR USE IN POTENTIALLY EXPLOSIVE AREAS
The device is suitable for use in potentially explosive areas as defined in
Directive 2014/34/EU (ATEX), (see Explosion protection marking Chapter 3.1).
2.4
PROCESSIBLE WORKING MATERIALS
Lacquers and paints, greases, oils and corrosion inhibitor, glue, ceramic glazes, stains.
If you want to spray working materials other than the aforementioned, contact a WAGNER
representative.
Note:
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter application
problems.
2.5
MISUSE
Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
No dry coating products, e.g., powder are processed.
no food, medicine or cosmetics are processed.
It is important to note that the device's materials are not food-safe.
ORDER NUMBER DOC 2397374
TOPFINISH GM 1030P
8
Advertisement
Table of Contents
