Processible Working Materials; Improper Use - WAGNER EvoMotion 40-15 S-HE Translation Of The Original Operating Manual

EDITION 10/2017
2.4

PROCESSIBLE WORKING MATERIALS

Fluid materials like paints and lacquers.
Application
Water-based materials
Solvent-based materials
Low viscosity (< 40 sec. DIN no. 4)
Medium viscosity (40–60 sec. DIN no. 4)
High viscosity (> 60 sec. DIN no. 4)
UV-sensitive materials
Shear-sensitive materials
Humidity-sensitive materials
recommended
NOTICE
Abrasive working materials and pigments!
Greater wear of product-wetted parts.
Use the application-oriented model (flow rate/cycle, product, valves, etc.) as
indicated in Chapter 5.5.
Check if the fluids and solvents used are compatible with the pump construction
materials as indicated in Chapter 5.5.1.
Use suitable device combinations (packings, valves etc.)
Wear caused by abrasive working materials is not covered by the warranty.
Typical applications
Fields of application
Furniture industry
Kitchen manufacturers
Joinery
Window factories
Steel-processing industry
Construction of vehicles
Shipbuilding
recommended
2.5 MISUSE
Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
No dry coating products, e.g., powder are processed.
no food, medicine or cosmetics are processed.
It is important to note that the device's materials are not food-safe.
ORDER NUMBER 2351778
limited suitability
limited suitability
EvoMotion 40-15 S-HE
EvoMotion 20-30 S-HE
not suitable
not suitable
9