Touch Panel Controller - Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual

2-13. TOUCH PANEL CONTROLLER

„ ADDRESS SETTING „
● Display the Installer Setting screen and press "Change" button of "1. Touch panel controller
„
address setting".
● Select "Address" from 00 to 15 on the screen and click the button. At the end of setting, click
„
"OK" button.
Note:
● Address No. can be set between "00" and "15". (Up to maximum 16 Touch Panel
Controller can be installed to 1 system).
● When installing two or more Touch Panel Controller, set up so that Address No. does
not overlap.
● Please refer to the OPERATING MANUAL of Touch Panel Controller for details.
● Please keep Address No. of Touch Panel Controller from overlapping the controller
(Central Remote Controller, Network Convertor for LonWorks, Modbus
Network Convertor for Group Remote Controller) connected to the same VRF Network
system
- (07-138) -
®
convertor and