Group Remote Controller; Touch Panel Controller; Network Convertor - Fujitsu Airstage V-II Design & Technical Data

664646 CONTROLLER CABLE WIRING
WIRING SPECIFICATIONS
„ „
Model type
System Controller USB Adaptor
Touch Panel
Transmission line
Controller
Group Remote

Network Convertor

Controller
Wired Remote
Indoor unit
Controller
Simple Remote
Indoor unit
Controller
Indoor unit
External Switch
Controller
External input
IR Receiver Unit
Indoor unit
(UTB-YWB)
IR Receiver Unit
Indoor unit
(UTY-LRHYB1)
Remote Sensor Indoor unit
EV Kit Indoor unit
*1 : Use shielded cable in accordance with local rules for remote controller cable.
● Install in accordance with local rules and regulations.
● Never bundle the power supply cable and controller cable together. Bundling these cords together
will cause misoperation.
● Always ground for shilded cable both end.
● For detail specification and connection, please refer to "5 Controll system".
● Controller might be required to connect power supply cable and transmission line. Use separate
connection with other units for power suply cable.
Connection to
USB cable
Remote controller
cable
Remote controller
cable
Remote controller
cable
Connection cable
Connection cable
Connection cable
Connection cable
Wire Size
-
0.33mm
0.33mm
0.33mm
0.33mm
-
-
-
-
Caution
- (06 - 64) -
Specification
Refer to 6-4-3
2
Shielded, Polar 3core
Sheathed PVC cable Polar
2
3core *1
2
Shielded, Polar 3core
Shielded, Polar 2core,
2
Twisted pair
(5m cable attached)
(10m cable attached)
(5m cable attached)