Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual page 908

„ FUNCTION SETTING „
5) Pressing the "+" or "-" button, select a remote controller address (select the indoor unit you
want to operate). Then press the "ENTER" button.
6) Pressing the "+" or "-" button, to select the function number. Then press the "ENTER"
button.
7) Pressing the "+" or "-" button, to select the setting number. Then press the "ENTER"
button.
● When the data was not set up on the indoor
unit (-- is displayed.)
● Set up the data again.
8) Pressing the "ENTER" button to return to the address selection screen. If setting has been
completed, pressing the "MENU" button to return to the Menu 2 item selection screen.
„ FUNCTION DETAILS „
Refer to 2-9. FUNCTION DETAILS.
Ex.) When remote controller address "01" is selected
ERROR
- (07-127) -
Remote controller address
Function number
Setting number
Ex.) Function number : 30,
Setting number : 01
GOOD
● When the data was normally set up on the
indoor unit.