Model: Uty-Rhk - Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual

2-10-2. MODEL: UTY-RHK
NOTE: A part of function is limited. It is recommended to use it together with other type
controller.
„ FUNCTIONS
„
4
Display panel
6
9
*1 : "AUTO " is not available for a heat pump model unless it is set up as an administrative indoor
unit.
*2 : "FAN " is not available for a heat pump model.
*3 : "HEAT " is not available for a cooling only model.
*4 : during Error code history display mode.
*5 : during address display mode.
*6 : during self Diagnosis mode.
● Easy operation.
● Built-in Backgroud Light function.
● Easy installation with a slim shape with no bulge in the back.
● Error history. (Last 16 error codes can be accessed.)
● Up to 16 indoor units can be simultaneously controlled.
● Can be installed onto Switch Box. (Applies to European and other
country's standard.)
● Concentrates on the basic operations such as Start/Stop, Fan
Control, and Temperature Setting.
2
3
1
5
8
7 12
10
11
1 START/STOP button
Pressed to start and stop operation.
2 Display with backlight
Lights during operation.
3 Operation lamp
Lights during operation.
4 Fan control button
Selects the fan speed.
5 Set temperature button
Selects the setting temperature. (18-30°C [COOL], 16-30°C [HEAT])
6 Standby indicator
Indicates during the oil recovery and defrosting operation.
7 Power source indicator
Indicates the main power ON.
8 Central control indicator
Indicates when function is locked from Touch Panel Controller or
System Controller.
9 Fan speed indicator
(AUTO
10 Set temperature
Indicates Error history number. *4
Indicates Indoor unit address. *5
11 Operating mode indicator
FAN * 2, HEAT * 3)
12 (Upper) Indicates the error code *4, *6 / the refrigerant
system address. *5
(Lower) Indicates the remote controller address. *1, *2, *3
- (05 - 93) -
, HIGH , MED , LOW
(AUTO * 1, COOL , DRY
)
,