Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual page 930

„ WHEN MANUAL ADDRESS SETTING NUMBER IS RESET „
1) Select the "14" in Menu 2-F1 Settings.
Then press the "
2) To reset the 2-wire remote controller address,
" button. select "1: Reset" with the SET TEMP. " " or SET
TEMP. " " button. If not resetting, select "0:Not
reset" with the SET TEMP. " " or SET TEMP.
" " button.
Press the "
item selection screen.
- (07-149) -
Address
automatically
allocated
0: Not reset
1: Reset
" button to return to the Menu 2-F1