Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual page 793

ii) 2-wire type
It can choose either automatic address setting.
 When setting the automatic address.
Set the remote controller address in the "0" only. (Factory setting is "0")
00 0 00 1 00 2
2 3 3 3
00 00 0 00 01 0 00 02 0 00 03 0 00 04 0 00 05 0
R.C.line: 2 wire *1
2 wire type R.C. 2 wire type R.C.
*
1 : Set the remote controller address in the "0" only
Address is automatically assigned from Remote controller.
- (07-12) -