To protect the compressor of the outdoor unit, carefully read and understand the following cautions that may affect
the operation of the compressor before executing the setting.
When performing periodical settings like schedule settings for the following functions, perform the setting to all the
indoor units in the same refrigerant system simultaneously, conforming to the timing restriction described below.
<Corresponding function>
· Start operation
· Release indoor unit forced
thermostat off mode
Forced thermostat OFF instruction
Only one equipment can send these instructions for each refrigerant system.
When these instructions are sent by multiple equipment, the system may not respond as instructed or may
malfunction.
SPECIFICATIONS
Power supply
Power consumption (W)
Temperature (°C)
Humidity (%)
Dimensions H × W × D (mm)
Weight (g)
More than 10 minutes must elapse
More than 10 minutes must elapse
1Ø AC220–240V 50/60Hz
Operating
Packaged
Packaged
0–95 (RH); No condensation
- (05 - 134) -
· Stop operation
· Set indoor unit forced thermostat
off mode
1.5
0–46
-10–60
54 x 260 x 150
1200