Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual page 543

„ FUNCTIONS
„
7
Display
2
8
9
10
11
12
13
Display panel
17
1 : "AUTO " is not available for a heat pump model unless it is set up as an administrative indoor

unit.
2 : Indoor unit can be set to administrative indoor unit by pressing "MODE" button for 5 seconds or

more.
3 : "FAN " is not available for a heat pump model.

4 : "HEAT " is not available for a cooling only model.

16
1
3
4
6
5
14
15
20 21 19 18
27 25 26 23 24 22
- (05 - 75) -
1 START/STOP button
Pressed to start and stop operation.
2 Set Temperature button
Selects the setting temperature.(18-30°C[COOL], 10-30°C[HEAT])
3 Operation mode button
 2
Selects the operating mode (AUTO
4 Fan control button
Selects the fan speed (AUTO
5 Vertical air flow direction and swing button
Press for two seconds to change the swing mode
6 Horizontal air flow direction and swing button
Press for two seconds to change the swing mode.
7 Built-in thermo sensor
Detect room temperature.
8 Timer mode (CLOCK ADJUST) button
Selects the timer mode (OFF TIMER, ON TIMER, WEEKLY TIMER)
Set the current time.
9 Day (DAY OFF) button
Temporarily cancels of one day timer.
10 Set back button
Pressed select the set back timer.
11 Set time button
Pressed to select the set back timer.
12 Timer delete button
The schedule of a weekly timer is deleted.
13 Timer set button
Sets the date, hour, minute and on-off time.
14 Economy button / Thermo sensor button
15 Maintenance button / Filter reset button
16 Operation lamp
Lights during operation and when the timer is on.
17 Timer and clock indicator
18 Operation mode indicator
19 Fan speed indicator
20 Operation lock indicator
21 Temperature indicator
Displayed temperature is set temperature.
22 Defrost indicator
Indicates during the oil recovery and defrosting operation.
23 Vertical swing indicator
24 Horizontal swing indicator
25 Economy indicator
26 Thermo sensor indicator
27 Filter indicator
1, COOL , DRY ,
FAN  3, HEAT  4).
, LOW , MED , HIGH ).