Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual page 783

„ INDOOR UNIT SETTING „
Please refer to the correct SW position for 2. Function Setting.
<step 1>
Refrigerant circuit address setting
<step 2>
Indoor unit address setting
<step 3>
Remote controller address setting
<step 4>
Function setting
„ RB UNIT SETTING „
Please refer to the correct SW position for 2. Function Setting.
(This function is available VR-II series)
<step 1>
Refrigerant circuit address setting
<step 2>
RB unit address setting
„ REMOTE CONTROLLER SETTING „
In case of Wired remote controller, Simple remote controller.
Dual remote control setting
¾ Other than above unit , Please refer the 2. Function setting and installation manual. „
Set the Rotary SW REF AD x10 & x1
See the detail for "1-2. Address setting"
Set the Rotary SW IU AD x10 & x1
See the detail for "1-2. Address setting"
Set the Rotary SW RC AD
See the detail for "1-2. Address setting"
Set the Rotary SW REF AD x10 & x1
See the detail for "1-2. Address setting"
Set the Rotary SW RB AD x10 & x1
See the detail for "1-2. Address setting"
Set the SW 2 of DIP Switch 1
See the detail for "2. Function setting"
- (07-02) -