Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual page 812

9) Select the "13" in Menu 2-F1 Settings. Then press the "
„ ADDRESS SETTING „
z INDOOR UNIT ADDRESS SETTING „
10) Select the 2-wire remote controller address with the SET TEMP. " " or SET TEMP. " "
button. Then press the "
11) Set the function number with the SET TEMP. " " or SET TEMP. " " button. Then press
the " " button.
12) Set the setting number with the SET TEMP. " " or SET TEMP. " " button. Then press
the " " button.
" button.
Select the 2-wire remote controller
address (Ex. Select the 002-01)
Function number
Indoor unit address
- (07-31) -
" button.