Central Remote Controller - Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual

2-14. CENTRAL REMOTE CONTROLLER

„ ADDRESS SETTING „
● Display the Installer Setting screen and Press the [
„
"Central Controller Address Setting".
● Press the [
„
Central remote controller address setting
● Press the [UP] button or [Down] button.
„
● Set the Address value.
„
The Address value can be set from 00 to 15.
● When the [
„
Note:
● Address No. can be set between "00" and "15". (Up to maximum 16 Central Remote
Controller can be installed to 1 system).
● When installing two or more Central Remote Controller, set up so that Address No.
does not overlap.
● Please refer to the OPERATING MANUAL of Central Remote Controller for details.
● Please keep Address No. of Central Remote Controller from overlapping the controller
(Touch Panel Controller, Network Convertor for LonWorks, and Network Convertor for
Group Remote Controller) connected to the same VRF Network system
] button.
] button is pressed, setting is complete.
] button and move the cursor to
- (07-139) -