Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual page 659

z Filter mode setting
„
Set the Filter mode to suppress an increase of the amount of communication information in the VR-II system.
● Filter mode is turned on by inserting the accessory connecting wire at the CN4 connector on the PC board.
● When the Filter mode setting is changed, turn the power off once. Otherwise, the setting will not be recognized.
CN4
„ DIMENSIONS
„
Ø28
For dust proof
bushing
Ø22.2 For conduit
4 - Ø5 For
Connecting wire (Accessory)
Body
PC board
89.5
89.5
241.6
272 Hole pitch
288
M4×20-mm
screws
- (05 - 191) -
(Unit : mm)
Ø28
For dust proof bushing
2-Ø5
For M4×20-mm
screws
67