Touch Panel Controller; Central Remote Controller; Setting Screen; Detail Setting Screen - Fujitsu Airstage VR-II Series Service Manual

4. Touch panel controller

(1) Select the objective you want to test run.
Select the objective icon or list at the monitor screen. (Multiple selections is possible)
Select all the devices registered as objectives by pressing "Select All" on the monitor screen.
(2) After objective selection at (1), switch to the <Setting screen> by pressing "Operation".
(3) Switch to the <Detail setting screen > by pressing "Optional setting" on the setting screen,
(4) Press "Start" button and OK on the details setting screen.
Test run continues for 60 minutes.
To interrupt test run, select the device being the test run and excute an operation stop.
At the monitor screen, test run can cancel by selecting objective device and press OFF.
<Setting screen>
Operation Setting
Control Unit : Meeting Room
operation
Mode
On Auto
On
Off Off Cool
Dry
Air Flow Direction
Economy
Fan
Anti Freeze
Filter Sign
Test Operation Heat
Optional
Operation
Setting
Controlled
Cancel Cancel

5. Central remote controller

(1) Press " " button.
(2) Press "Set up Menue" and input password.
(3) Select "Indoor unit special setting" by presing
(4) Select "Test operation by presing"
(5) Press the "Select ALL button" or "ldentify unit" button
[ Select All ]: All of R.C.Group (Indoor units)
[ Identify Unit ] : Specific R.C.Group (Indoor unit)
(6) Press the " Start " button
The test run continues for 60 minutes.
To interrupt test run before it is complet, return to the "Monitor Mode Screen",
and press ON/ OFF.
Indoor unit Special Setting
Test Operation
Indoor Unit
Set Temp. Range
Status: On
10/11.2008.Mar. 02:20 PM
R/C Prohibition
All
Set Temp. Fan
Auto
24.0 C On/Off
High
On
Med Mode
Low
Temp.
Quiet
Timer
Filter
or
05/31 03:59
Filter Sign
R.C. Prohibition
<Detail Setting screen>
Operation Setting
OK OK
or button.
button
Test Operation
RCG_05
01-18
UTY - DTG
10/11.2008.Mar. 02:20 PM
Optional Setting
Economy
Air Flow Direction
On
Up
1
2
3
Off
4
Swing
Down
Test Operation
Left Right
Special State
1 2 3 4 5
Stand by (Defrost)
Swing
Stand by (Oil Recovery)
Test Operation
Cancel
UTY-DCG
05/31 03:59
Group
Select
All
Identify
Unit
Clear
Unit
Status: On
Anti Freeze Filter Sign
On Reset
Off
Start
OK