Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual page 856

LED105
Setting Mode
CODE No.
2 6 Prohibited
2 7 Prohibited
2 8 Prohibited
2 9 Prohibited
Energy saving
3 0
level setting
3 2 Prohibited
3 3 Prohibited
Capacity
priority setting
4 0
(in low noise
mode)
Low noise
4 1
mode setting
Low noise
mode
4 2
operation level
setting
*1: Do not set this for outdoor units with Slave setting.
LED104
Setting Function
CODE No.
0 0 Prohibited
0 1 Prohibited
0 0 Prohibited
0 1 Prohibited
0 0 Prohibited
0 1 Prohibited
0 0 Prohibited
0 1 Prohibited
0 0 Level 1 (stop)
Level 2 (operated at
0 1
40% capacity)
Level 3 (operated at
0 2
60% capacity)
Level 4 (operated at
0 3
80% capacity)
Level 5 (operated at
0 4
100% capacity)
0 0 Prohibited
0 1 Prohibited
0 2 Prohibited
0 0 Prohibited
0 1 Prohibited
0 0 Off (quiet priority)
0 1 On (capacity priority)
0 0 Off (Normal)
0 1 On (Low noise mode)
0 0 Level 1
0 1 Level 2
- (07-75) -
Outdoor unit
Factory
setting
Master Slave
l
Setting prohibited
l
Setting prohibited
l
Setting prohibited
l
Setting prohibited
l
The capacity limit can be
selected by the external
input terminal (CN133) when
operating with the "Energy
-
¡
Saving Peak Cut function."
*1
The lower the level, the more
the effect of energy saving, but
the cooling/heating performance
will also drop.
l
Setting prohibited
l
Setting prohibited
If the cooling/heating
performance becomes
insufficient when the low noise
l
mode is set, it is possible to
- set "capacity priority" that
¡
*1 automatically cancels the low
noise mode (once performance
is restored, the mode will
automatically return to the low
noise mode).
l
-
¡
*1
Level1: The operating sound
l
lowers from about 3 to 5 dB(A)
more than the rated value
-
¡
*1
Level2: The operating sound
lowers from about 3 to 5 dB(A)
more than the Level1
Remarks