Alcatel-Lucent 1665 Installation Manual page 78

Data multiplexer extend (dmxtend)
Hide thumbs Also See for 1665:
Table of Contents

Advertisement

Cable and fiber installation
........................................................................................................................................................................
Cable length
(feet)
10
20
30
50
75
100
125
150
175
200
250
350
450
550
655
Notes:
1. Each Cable Assembly # is a kit that contains 2 cables. For Input connections use cable
CA1 (DS1/E1 IN) and for Output connections use cable CA2 (DS1/E1 OUT).
2. Each Cable Assembly # that routes to the right (when facing the rear of the shelf), listed
includes all the DS1/E1 cables for one function group using the 28DS1 card.
3. In addition to each Cable Assembly # that route to the right (when facing the rear of the
shelf), one Cable Assembly # of cables that route to the left (when facing the rear of the
shelf), must be ordered for the additional capacity of the 56DS1/E1 card.
Alcatel-Lucent 1665 DMXtend
4.
can be used for either DS1/E1 or DS3/EC-1 cabling.
5. Cables are terminated in J1D through J4D and J7G through J10G connectors at the
Alcatel-Lucent 1665 DMXtend end and unterminated at the other end for wire-wrap
installation.
6. The cable connectors are 62 pins D-Sub male-type connectors and fit into J1D through
J4D and J7G through J10G.
7. The DS1/E1 cables are 24 Gauge.
........................................................................................................................................................................
3 - 1 0
Cable
assembly #
Description
848954962
Function Group G
DS1/E1 In (CA1) and
848954970
DS1/E1 Out (CA2) Cable
848934964
Function Group D
DS1/E1 In (CA1) and
848912473
DS1/E1 Out (CA2) Cable
848934972
848912564
848934980
848912648
848934998
848935003
848912671
848912978
848912986
848913000
848935011
connectors J1D through J4D and J7G through J10G
Alcatel-Lucent 1665
DMXtend backplane
connections
These cables route to the
right (as viewed from
the rear of the shelf) and
should be used with
connectors J1D (IN),
J3D (OUT) and J7G
(IN), J9G (OUT)
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013

Advertisement

Table of Contents
loading

Table of Contents