Alcatel-Lucent 1665 Installation Manual page 248

Network turn-up and testing
............................................................................................................................................................................................................................................................
Listed below are the required tools, test equipment and accessories.
Qty.
1
1
1
1
2 or 3
1
............................................................................................................................................................................................................................................................
II I- 2
Description
ESD Wrist Strap
R-4987C
DS1/E1 Error Rate Test Set
ITE-7113
DS3 Error Rate Test Set
ITE-7113
Optical Test Set (Optional)
LC-type Optical Fiber
Jumper ITE-7169
(108918269)
15-dB LC-type LBO ITE-
7196 (108279480)
Noyes OFS 300-200X
Optical Fiber Scope
ITE-7129
2.5mm Universal adapter
cap ITE-7129 D1
1.25mm Universal adapter
cap ITE-7129 D2
Noyes VFS-1 ITE-7187
1
Video Fiber Scope
Individual presaturated
alcohol wipes ITE-7136
Comments
A wrist strap must be worn when handling circuit
packs. Use the electrostatic discharge (ESD) jack
provided on the shelf.
A DS1/E1 error rate test set is required for testing of
DS1/E1 cabling. A T-BERD 2209 or equivalent is
recommended.
A DS3 error rate test set is required for testing of DS3
cabling. A T-BERD 209 or equivalent is
recommended.
A Optical test set is required for testing of low speed
optics OC3/12/48. An Omniber 718 or equivalent is
recommended.
Two optical fiber jumpers with LC type connectors are
required to optically loop the Alcatel-Lucent 1665
DMXtend shelf for test purposes. In addition, for
shelves containing optical circuit packs in any of the
function unit slots, a single optical fiber jumper is
required for testing of the individual ports.
LBOs are only required when optically looping the
Alcatel-Lucent 1665 DMXtend shelves containing
optical circuit packs in any of the function unit slots; a
single 15-dB LBO is required for testing of the
individual ports
This equipment may not be necessary at all locations.
It is to be used when the ports need to be verified for
cleanliness. If care is exercised when cleaning fibers,
the optical fiber scope may not be needed
For use with the Noyes OFS 300-200X Optical Fiber
Scope
This equipment may not be necessary at all locations.
It is to be used when the ports need to be verified for
cleanliness. If care is exercised when cleaning fibers,
the video scope may not be needed
99% pure isopropyl alcohol
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013