Power Cable Installation; Fiber Spools - Alcatel-Lucent 1665 Installation Manual

Data multiplexer extend (dmxtend)
Hide thumbs Also See for 1665:
Table of Contents

Advertisement

Physical installation
............................................................................................................................................................................................................................................................
Figure 2-8 Fiber spools
........................................................................................................................................................................................................................
12
Verify with an ohmmeter that the Alcatel-Lucent 1665 DMXtend shelf is grounded to the
bay frame. Measure between the Alcatel-Lucent 1665 DMXtend shelf mounting bracket
and the office ground lug on the bay frame.
Requirement: The ohmmeter reads less than 1 ohm.
........................................................................................................................................................................................................................
13
Verify with an ohmmeter that the ESD Jack Stud mounted at the rear of the shelf is
grounded to the bay frame. Measure between the ESD Jack Stud and the office ground lug
on the bay frame.
Requirement: The ohmmeter reads less than 1 ohm.
........................................................................................................................................................................................................................
14
Check off the appropriate box in the
E
O
N D
........................................................................................................................................................

Power cable installation

Description
This section provides instructions on installing the power cable and cable bracket for the
Alcatel-Lucent 1665 DMXtend shelf.
Two feeders (A and B) are required from the battery distribution fuse board (BDFB) or
battery distribution circuit breaker bay (BDCBB) to the Alcatel-Lucent 1665 DMXtend
bay.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
S
F
T E P S
Table I-2, Installation
checklist.
2 - 1 3

Advertisement

Table of Contents
loading

Table of Contents