............................................................................................................................................................................................................................................................

Place the circuit pack into the shelf (slot D2, or G2 as required). Do NOT engage the

circuit pack in the backplane connector.

Repeat

with LNW7, LNW8 or LNW801 circuit packs.

Check off the appropriate box in the

N D

........................................................................................................................................................

LNW16 (12DS3/EC1) and LNW19B (48DS3/EC1) installation (optional)

Follow this procedure only if installing LNW16 (12DS3/EC1) or LNW19B (48DS3/EC1)

circuit packs into the Alcatel-Lucent 1665 DMXtend shelf.

See the engineering job specification. Identify the proper function group(s) where LNW16

or LNW19B will be installed.

Remove the LNW16 or LNW19B from the packing material.

Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the

circuit pack in the backplane connector.

If a protection circuit pack is required, continue with the

LNW98 Apparatus Blank into the protection circuit pack slot (D2 or G2 as required), then

proceed to

Important!

to provide proper air flow for cooling.

Remove the second LNW16 or LNW19B from the packing material.

Alcatel-Lucent 1665 DMXtend R10.0

365-372-327R10.0 Issue 1

January 2013

Step 1

through

Step 6

T E P S

Step

177D or LNW98 Apparatus Blanks are required in all unused slots D and G

for each additional function group D or G to be equipped

"Installation checklist" (p.

I-6).

Step

5. If not, install a 177D or

4 - 1 3

Table of Contents

Alcatel-Lucent 1665 Installation Manual page 147

Related Manuals for Alcatel-Lucent 1665

Related Products for Alcatel-Lucent 1665

Table of Contents