Clearing Alarms - Alcatel-Lucent 1665 Installation Manual

Stand-alone installation testing
............................................................................................................................................................................................................................................................

Clearing alarms

Description
In order to clear standing alarms the Alcatel-Lucent 1665 DMXtend synchronization will
be optioned for "Free Running." The DCC will be disabled in order to prevent DCC
alarms from being generated due to the optical loopback on the main OLIUs.
........................................................................................................................................................................................................................
1
Use t the
........................................................................................................................................................................................................................
2 Configure Timing/Sync
The
........................................................................................................................................................................................................................
3
Under the
........................................................................................................................................................................................................................
4 OK
Click
........................................................................................................................................................................................................................
5
Use the
........................................................................................................................................................................................................................
6 Configure DCC Terminations
The
........................................................................................................................................................................................................................
7 Port AID:
For
........................................................................................................................................................................................................................
8 OSI Over DCC
For
........................................................................................................................................................................................................................
9
Click Apply to send the command.
........................................................................................................................................................................................................................
10 Port AID:
For
........................................................................................................................................................................................................................
11 OSI Over DCC
For
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
GUI
to change the system timing.
window will be displayed.
System Timing
tab set the
to issue the command.
GUI
to turn off the DCCs.
select dcc-m1-1.
disabled.
select
select dcc-m2-1.
disabled.
select
Configuration > Timing Sync
Timing Mode: Free Running
to
Configuration > DCC Terminations
window will be displayed.
.
6 - 7