Alcatel-Lucent 1665 Installation Manual page 152

Circuit pack installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
5
Remove the second LNW39, LNW391, LNW111 or LNW112 from the packing material.
........................................................................................................................................................................................................................
6
Place the circuit pack into the shelf (slot A2/B2). Do NOT engage the circuit pack in the
backplane connector.
........................................................................................................................................................................................................................
7
Check off the appropriate box in the
E O
N D
........................................................................................................................................................
LNW49 (OC-12 4 port PTM OLIU) low-speed installation (optional)
Follow this procedure only if installing the LNW49 (OC-12 4 port PTM OLIU) circuit
packs into the Alcatel-Lucent 1665 DMXtend shelf.
Note:
with one box containing the circuit pack, and the other containing the ordered quantity
of PTMs. This procedure will consist of two parts.
– Install the circuit card
– Install the PTM.
........................................................................................................................................................................................................................
1
See the engineering job specification. Identify the proper function group(s) and/or growth
slot(s) where LNW49 circuit pack will be installed.
........................................................................................................................................................................................................................
2
Remove the LNW49 from the packing material.
........................................................................................................................................................................................................................
3
Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the
circuit pack in the backplane connector.
........................................................................................................................................................................................................................
4
If a companion circuit pack is required, continue with the
LNW98 Apparatus Blank into the protection circuit pack slot (D2 or G2 as required), then
proceed to
Note:
provide proper air flow for cooling.
............................................................................................................................................................................................................................................................
4 - 1 8
S
F T E P S
The LNW49 (OC-12 4 port PTM OLIU) circuit pack comes in separate boxes,
Step 7.
177D or LNW98 Apparatus Blanks are required in all unused slots D and G to
Table I-2, Installation
Step
checklist.
5. If not, install a 177D or
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013