............................................................................................................................................................................................................................................................

Rotate the cassette lever all the way down with your thumb. Do not release the lever. The

lever advances the "dry" Luminex cleaning cloth inside the case and simultaneously opens

the shutter. The CLETOP cassette shutter door is now open and ready for cleaning the

connector.

Figure A-2 CLETOP cleaner

Insert and press the connector ferrule endface perpendicular against the cleaning cloth in

the first of two slots of the cleaner. See

cleaning" (p.

Drag it down (in the direction indicated by the arrows on the cleaner). Make certain not to

release the lever of the cassette.

Lift the connector from the first slot and rotate it 90 degrees and repeat the downward

motion using the second slot. Be sure the ferrule is pressed snug against the cleaning cloth

while dragging the ferrule to assure the proper cleaning action.

Release the cassette lever allowing the shutter door to close to its initial position. Continue

with

Step

Wrap a Luminex cleaning cloth around the ferrule and rotate the connector housing,

cleaning the outside periphery of ferrule.

Alcatel-Lucent 1665 DMXtend R10.0

365-372-327R10.0 Issue 1

January 2013

A-7).

Figure A-3, "Acceptability criteria for fiber

A- 5

Table of Contents

Alcatel-Lucent 1665 Installation Manual page 295

Related Manuals for Alcatel-Lucent 1665

Related Products for Alcatel-Lucent 1665

Table of Contents