Led Test - Alcatel-Lucent 1665 Installation Manual

Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
19
Check off the appropriate box in
E O
N D
........................................................................................................................................................

LED test

Description
This test verifies proper operation of all LEDs on the Alcatel-Lucent 1665 DMXtend
circuit packs. Operation of all the LEDs is necessary to assist in trouble isolation.
Note:
or shelf and replace the faulty unit.
Steps
........................................................................................................................................................................................................................
1
If not still connected from the previous procedure. Connect the Front CIT cable between
the PC and the CIT/RS 232 port or OSI front LAN port of the System Controller and login
to the shelf using the serial/LAN connection and the GUI options on WaveStar
........................................................................................................................................................................................................................
2
Use the
........................................................................................................................................................................................................................
3
Click on the
........................................................................................................................................................................................................................
4 Select Shelf (
........................................................................................................................................................................................................................
5 Select.
Click
........................................................................................................................................................................................................................
6 Number of Iterations = 1
Click
........................................................................................................................................................................................................................
7
Click OK.
............................................................................................................................................................................................................................................................
6 - 4 0
S
F T E P S
If there are any LED failures, determine if the problem is with the circuit pack
GUI
window to send the
Fault > Test > LED.
Alcatel-Lucent 1665 DMXtend
"Installation checklist" (p.
Test-LED
command.
).
.
II-5).
®
CIT.
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013