............................................................................................................................................................................................................................................................

Table 2-2, "Power cable assemblies" (p. 2-16)

(p. 2-16)

Steps

Connect the A and B power cables to the A and B power connector housings on the back

of the Alcatel-Lucent 1665 DMXtend Shelf. See

(p.

2-14).

Figure 2-9 Power connection

Route the power cable out of the bay and toward the BDCBB or BDFB, stacking the cable

in the bay.

Note:

Splice feeders from the BDCBB or BDFB to the Alcatel-Lucent 1665 DMXtend power

cable. See

2 - 1 4

lists the available power cable assemblies and power connections, respectively.

CAUTION

Verify that the BDCBB breakers are off or that the BDFB fuses are not installed.

CAUTION

Ensure that the four parts of the terminal inside the connector attached to the

power cable are properly aligned before inserting the connector into the power

connector housing. Failure to do so may result in damage to the connector.

The Alcatel-Lucent 1665 DMXtend is powered by -48 V DC.

CAUTION

Verify that the BDCBB breakers are off or that the BDFB fuses are not installed.

Table 2-3, "Power connections" (p.

and

Table 2-3, "Power connections"

Figure 2-9, "Power connection"

2-16). and should be labeled as follows;

Alcatel-Lucent 1665 DMXtend R10.0

365-372-327R10.0 Issue 1

January 2013

Table of Contents

Power Connection - Alcatel-Lucent 1665 Installation Manual

Related Manuals for Alcatel-Lucent 1665

Related Content for Alcatel-Lucent 1665

Table of Contents