Alcatel-Lucent 1665 Installation Manual page 237

Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
3
Click on the
........................................................................................................................................................................................................................
4
Under the
........................................................................................................................................................................................................................
5
Click on the
........................................................................................................................................................................................................................
6
Select The
........................................................................................................................................................................................................................
7
Provision the Line Coding and format as determined in
........................................................................................................................................................................................................................
8 OK.
Click
........................................................................................................................................................................................................................
9 Yes
Click
........................................................................................................................................................................................................................
10
Use the
........................................................................................................................................................................................................................
11
Click on the
........................................................................................................................................................................................................................
12 View Timing/Sync
The
Result:
•
•
•
•
Note:
reference. Verify:
– Cabling between the timing source and the Alcatel-Lucent 1665 DMXtend shelf
– Correct line coding
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
Configuration > Timing/Sync.
System Timing tab
Timing Mode = External
Timing Input Ports
to issue the command
GUI
View sync command.
View > Timing/Sync
window will display.
The tabs should display:
Correct line coding and frame format
Provisioned and active timing mode are both external
Both references are In Service.
Which of the two references is active
If a reference does not indicate is, that input is not receiving a proper timing
Configure Timing/Sync window
of the
.
Tab.
.
.
.
Step 1 above.
6 - 5 3