Manual Switching Tests - Alcatel-Lucent 1665 Installation Manual

Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
7
Swap circuit packs from another function group to test any unequipped function slots.
........................................................................................................................................................................................................................
8
Check off the appropriate box in the
E O
N D
........................................................................................................................................................

Manual switching tests

Description
This test will initiate switching commands from the WaveStar
switching and LED indications.
Main OLIU switch test
Note:
........................................................................................................................................................................................................................
1
Use the
........................................................................................................................................................................................................................
2
Verify the active path, with the
Result:
when selected. The M1 OLIU is associated with Ring 1 and the M2 OLIU is
associated with Ring 2.
........................................................................................................................................................................................................................
3
Use the
........................................................................................................................................................................................................................
4
Click on the
........................................................................................................................................................................................................................
5
Double Click on a path; e.g.,
........................................................................................................................................................................................................................
6
Observe the
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
S
F T E P S
An STS-1 cross-connect should still exist from the previous tests.
GUI
to view the path protection command.
Each cross-connect that was entered will have an active path associated with it
GUI
to enter the manual path protection switch command.
Fault > Protection Switch > Path Protection.
Path m1-1-1
Active Path
displayed.
"Installation checklist" (p.
View > Protection > Path Protection
.
II-5).
®
GUI and verify proper
command.
6 - 4 9