Removing Provisioning And Equipage From The Lnw705 And Lnw785 - Alcatel-Lucent 1665 Installation Manual

WDMX setup and testing: integration procedures
........................................................................................................................................................................
................................................................................................................................................
15
Check off the appropriate box in
E O
N D
........................................................................................................................................................
Removing provisioning and equipage from the LNW705 and
LNW785
Description
This section provides procedures on how to properly remove provisioning from the
Alcatel-Lucent 1665 DMXtend shelf once testing is completed and the equipment/ports
are no longer needed. Locate the procedure below to remove the equipment and return the
Alcatel-Lucent 1665 DMXtend back to the original status.
Deleting the OCH cross-connection
................................................................................................................................................
1
Login to the Alcatel-Lucent 1665 DMXtend using the WaveStar
................................................................................................................................................
2
Retrieve OCH Cross-connections.
Select View > OCH Cross-connections from the System View
................................................................................................................................................
3
Click the "+" next to OMD5/8 circuit pack to expand the list.
Record the list of ports to be used when deleting OCH cross-connections. If there are more
than one OMD5/8 circuit packs installed, click on the "+" next to the others to document
the list of OCH cross-connection for the remaining circuit packs.
................................................................................................................................................
4
Delete OCH Cross-connections
Select Configuration > OCH Cross-connections from the System View
................................................................................................................................................
5
Select the Delete an existing OCH cross-connection radio button in the OCH Cross-
Connection Wizard. Click Next.
........................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
S
F T E P S
Table I-2, Installation checklist.
®
CIT.
8 - 1 1