Modem Cable Installation; Lan 10Base-T Cross-Over Cable Connections; Lan 10Base-T Straight-Through Cable Connections - Alcatel-Lucent 1665 Installation Manual

Cable and fiber installation
........................................................................................................................................................................
Table 3-14 LAN 10Base-T cross-over cable connections
Connection
J17 (IAO LAN)
Table 3-15 LAN 10Base-T straight-through cable connections
Connection
J17 (IAO LAN)

Modem cable installation

Description
The use of a modem will allow the Alcatel-Lucent 1665 DMXtend to be accessed
remotely via dial up.
Note:
modem or a distribution frame (if specified in the order).
Steps
................................................................................................................................................
1
Obtain the modem cable per
the RJ45 end of the modem cable to the MODEM port (J18) of Alcatel-Lucent 1665
DMXtend shelf and route it to the left side of the shelf. (See
connection" (p.
........................................................................................................................................................................
3 - 4 4
Alcatel-Lucent
1665 DMXtend
bkpl
1
2
3
6
Alcatel-Lucent
1665 DMXtend
bkpl
1
2
3
6
Perform this procedure for the shelf which will be directly connected to a
Table 3-16, "Modem cable assemblies" (p.
3-45).
Other
Color side
BL - W 3
W - BL 6
O - W 1
W - O 2
Other
Color side
BL - W 1
W - BL 2
O - W 3
W - O 6
3-45). Connect
Figure 3-13, "Modem cable
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013