Alcatel-Lucent 1665 Installation Manual page 153

Circuit pack installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
5
Remove the second LNW49 from the packing material.
........................................................................................................................................................................................................................
6
Place the circuit pack into the shelf (slot D2 or G2 as required).
........................................................................................................................................................................................................................
7
Repeat
equipped with LNW49 circuit packs.
........................................................................................................................................................................................................................
8
Check off the appropriate box in the
E O
N D
........................................................................................................................................................
LNW62 (4 OC-48 PTM OLIU) or LNW55 (OC-3/OC-12/OC-48 12/4 port OLIU) low speed installation
(optional)
Follow this procedure only if installing the LNW62 (4 OC-48 PTM OLIU) or LNW55
(OC-3/OC-12/OC-48 12/4 PTM OLIU) circuit packs into the Alcatel-Lucent 1665
DMXtend shelf.
Note:
with LNW55 OC3/OC12/OC48, LNW84 OC3/OC12/OC48, LNW705 XM10G/8,
and/or LNW785 OMD, circuit packs. This shelf cover provides more space to prevent
fibers from touching the front cover when the cover is closed.
Note:
VLF main OLIU to be used.
Note:
containing the circuit pack, and the other containing the ordered quantity of PTMs.
This procedure will consist of two parts.
– Install the circuit card
– Install the PTM.
........................................................................................................................................................................................................................
1
See the engineering job specification. Identify the proper function group(s) and/or growth
slot(s) where LNW62 or LNW55 circuit pack will be installed.
........................................................................................................................................................................................................................
2
Remove the LNW62 or LNW55 from the packing material.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
Step 1 through Step 6
S
F T E P S
A deeper shelf cover (comcode 849064282) is required for shelves equipped
The LNW62 and the LNW55 circuit packs require the LNW141 or LNW84
The LNW62 and LNW55 circuit pack comes in separate boxes, with one box
for each additional function group and/or growth slot to be
Table I-2, Installation checklist.
4 - 1 9