Stand-alone installation testing
............................................................................................................................................................................................................................................................
Modem connection test
Description
This test will verify proper modem connection to the Alcatel-Lucent 1665 DMXtend
shelf.
This test should only be performed if a modem is required.
Steps
........................................................................................................................................................................................................................
1
Verify the generic parameters of the modem are set to the following:
Modem Parameters
1200, 2400, 4800, 9600, or 19,200 baud
•
Full duplex
•
8 data bits
•
No parity bits
•
1 start bit
•
1 stop bit
•
No flow control
•
Transparent data mode - ON
•
Direct operating mode - ON
•
Note:
require other options to be set before using the modem. See manufacturer's manuals
for instructions on setting modem parameters.
........................................................................................................................................................................................................................
2
Verify that the modem cable is properly connected from the modem to J18 MODEM on
the backplane of the Alcatel-Lucent 1665 DMXtend shelf.
........................................................................................................................................................................................................................
3
Use the
........................................................................................................................................................................................................................
4
Click on the
........................................................................................................................................................................................................................
5
Data Communications
The
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
Modems supporting a large set of options and error detection capabilities may
GUI
to set the modem command.
Administration > Data Communications...
window opens select the
Serial Port
tab.
6 - 5 9