Lc-Type Lbo; Lc-Type Lbo Inserted Into Lc-Type Connector Port - Alcatel-Lucent 1665 Installation Manual

Installing fiber connectors and LBOs
............................................................................................................................................................................................................................................................
new LC™ optic attenuators are designed to provide flat spectral loss across the full
spectrum, allowing the attenuators to be used in the 1300-nm, 1400-nm, and 1500-nm
bands.
Figure C-2 LC-type LBO
Assembly of LC-type LBO into LC block
The LC-type LBOs are installed into the LC-type connector by aligning the alignment key
with the slot in the connector port and pushing the LBO into the port until it snaps into
place.
Figure C-3 LC-type LBO inserted into LC-type connector port
Removal of LC-type LBO from LC block
The LC-type LBOs are removed from the LC-type connector port by depressing the tab to
release the LBO and then pulling straight out.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
SNAP-ACTION TAB
ALIGNMENT KEY
ALIGNMENT
SLOT
15-dB LBO
C - 3