Alcatel-Lucent 1665 Installation Manual page 230

Stand-alone installation testing
............................................................................................................................................................................................................................................................
Prior to performing each test, the shelf under test must be clear of all alarms (that is,
•
only green LEDs are lit).
A properly grounded ESD wrist strap MUST be worn when handling circuit packs.
Unterminated optical connectors may emit laser radiation. Do not view beam with
optical instruments.
When connecting fiber loops between the IN and OUT ports on optical circuit packs,
always connect to the IN port first and then the OUT port. This will prevent any optical
radiation from being present at the fiber end.For more detailed information and safety
precautions, see
Main OLIU switching test
Use this procedure to test the following Main OLIU circuit packs:
LNW40, LNW601, LNW38, LNW51, LNW302, LNW382, LNW41, LNW141 or
•
LNW84
........................................................................................................................................................................................................................
1
Establish a CIT session by following the procedure under
software" (p.
........................................................................................................................................................................................................................
2
Click on the
........................................................................................................................................................................................................................
3
Select
........................................................................................................................................................................................................................
4 Select
Click
Result:
............................................................................................................................................................................................................................................................
6 - 4 6
CAUTION
ESD hazard
WARNING
Laser hazard
CAUTION
Laser hazard
Chapter 1, "Safety".
5-6).
View > Cross-Connections
Shelf
.
to issue the command.
The cross-connects entered previously should still be in place.
"Use of WaveStar
.
Alcatel-Lucent 1665 DMXtend R10.0
®
CIT
365-372-327R10.0 Issue 1
January 2013