............................................................................................................................................................................................................................................................

Remove the second pack from the packing material.

Place the circuit pack into the shelf (slot D2 or G2 as required).

Repeat

equipped with the circuit packs.

Check off the appropriate box in the

N D

........................................................................................................................................................

LNW39/LNW391 (DS1/DS3/16/3), LNW111 (3DS3) and LNW112 (16DS1) installation (optional)

Follow this procedure only if installing LNW39/LNW391 (DS1/DS3/16/3), LNW111

(3DS3) or LNW112 (16DS1) circuit packs into the Alcatel-Lucent 1665 DMXtend shelf.

Note:

LNW141 or LNW84 VLF main OLIU is used.

See the engineering job specification. Identify the proper function group slots where

LNW39, LNW391, LNW111 or LNW112 circuit pack will be installed.

Remove the LNW39, LNW391, LNW111 or LNW112 from the packing material.

Place the circuit pack into the shelf (slot A1/B1). Do NOT engage the circuit pack in the

backplane connector.

If a protection circuit pack is required, continue with

LNW96 Apparatus Blank into the protection circuit pack slot (A2/B2), then proceed to

Step

Important!

and A2/B2 to provide proper air flow for cooling.

Alcatel-Lucent 1665 DMXtend R10.0

365-372-327R10.0 Issue 1

January 2013

Step 1

through

Step 6

T E P S

The LNW39, LNW391, LNW111 and LNW112 are not supported when the

LNW43 or LNW96 Apparatus Blanks are required in all unused slots A1/B1

for each additional function group and/or growth slot to be

Table I-2, Installation

checklist.

Step 5

If not, install an LNW43 or

4 - 1 7

Table of Contents

Alcatel-Lucent 1665 Installation Manual page 151

Related Manuals for Alcatel-Lucent 1665

Related Products for Alcatel-Lucent 1665

Table of Contents