Alcatel-Lucent 1665 Installation Manual page 43

Part I: Physical and power
installation
Overview
Introduction
Part I covers the physical mounting of the Alcatel-Lucent 1665 Data Multiplexer Extend
(Alcatel-Lucent 1665 DMXtend) shelf using the Horizontal Bay Mount. This section
includes running and connecting power cables, interconnecting cables, alarm cables, and
as required, external timing, and communication cables. Initial circuit pack installation
(not seated) is also included.
Part I provides a recommended checklist
installing Alcatel-Lucent 1665 DMXtend. Use of the installation checklist is required to
ensure a quality installation. All completed tasks should be checked off and those not
completed should be duly noted as to the reason why. This checklist should be turned in as
part of your job complete paperwork.
Note:
an additional fan shelf since the fan unit is integral to the shelf itself.
Contents
This part includes the following chapters:
Chapter 2, "Physical installation"
Chapter 3, "Cable and fiber installation"
Chapter 4, "Circuit pack installation"
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
The Alcatel-Lucent 1665 DMXtend shelf does not require the installation of
Table I-2 "Installation checklist" to follow when
I- 1