Alcatel-Lucent 1665 Installation Manual page 285

WDMX setup and testing: integration procedures
........................................................................................................................................................................
Deleting the OCH cross-connection
................................................................................................................................................
1
Login to the Alcatel-Lucent 1665 DMXtend using the WaveStar
................................................................................................................................................
2
Retrieve OCH Cross-connections.
Select View > OCH Cross-connections from the System View
................................................................................................................................................
3
Click the "+" next to OMD5/8 circuit pack to expand the list.
Record the list of ports to be used when deleting OCH cross-connections. If there are more
than one OMD5/8 circuit packs installed, click on the "+" next to the others to document
the list of OCH cross-connection for the remaining circuit packs.
................................................................................................................................................
4
Delete OCH Cross-connections
Select Configuration > OCH Cross-connections from the System View
................................................................................................................................................
5
Select the Delete an existing OCH cross-connection radio button in the OCH Cross-
Connection Wizard. Click Next.
................................................................................................................................................
6
Click the "+" next to OMD5/8 circuit pack to expand the list
................................................................................................................................................
7
Highlight one of the OCH cross-connections from the list recorded in
Next.
................................................................................................................................................
8
Highlight All Legs and click Next, Finish, then Yes.
................................................................................................................................................
9
Repeat
................................................................................................................................................
10
End the OCH cross-connection Wizard session by clicking Close.
........................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
Step 5 through Step 8 for all remaining OCH cross-connections recorded in
®
CIT.
Step 3 and click
Step
8 - 1 7
3.