Cable Requirements And Options - Alcatel-Lucent 1665 Installation Manual

Cable and fiber installation
........................................................................................................................................................................
Quantity
1
1
Notes:
1 Registered trademark of Thomas & Betts Corporation
2 Registered trademark of Paladin Corporation.
Cabling checklist
This section briefly describes cabling information, including the number of particular
cables required. For information regarding available cable lengths and ordering comcodes,
see the tables in this chapter.
Table 3-1, "Cable requirements and options" (p. 3-3)
required number (if any).
Table 3-1 Cable requirements and options
Cable assembly description
CIT
DS1/E1
DS3/EC-1
DS1/DS3 Hybrid
Office Alarm
Office Alarm Mult
Miscellaneous Discrete
LAN 10BASE-T (Crossover)
LAN 10BASE-T (Straight Through)
Sync Timing
Modem
........................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
Description
ESD Wrist Strap R-4987C
Multimeter (Optional)
ITE-6379
Comments
A wrist strap must be worn when handling circuit
packs. Use the electrostatic discharge (ESD) jack
provided on the shelf.
The voltmeter must be capable of measuring DC
voltage in the 40 to 60 volt range. The use of the
voltmeter is optional since the shelf will alarm or
shut down if the proper voltage is not supplied.
lists available cables along with the
Required See note
Yes 1
Optional 2
Optional 3, 4
Optional 5
Optional 6
Optional 6
Optional
Optional 7
Optional 7
Optional
Optional
3 - 3