Alcatel-Lucent 1665 Installation Manual page 190

Stand-alone installation testing
............................................................................................................................................................................................................................................................
Setting DS3/EC1 LBOs
The DS3/EC1 cabling will be tested with all ports provisioned for DS3. Set DS3 LBO
values as follows.
........................................................................................................................................................................................................................
9
See the following table of cable lengths and LBO values. Determine the LBO value
corresponding to the DS3 cables installed:
........................................................................................................................................................................................................................
Use the GUI window click on Configuration:Equipment command.
10
........................................................................................................................................................................................................................
11
Double-click on a Function Group where the LNW16/LNW18/LNW19B/LNW20 or
LNW39/LNW111/LNW391/LNW84 is located.
........................................................................................................................................................................................................................
12
Select Port 1 and the first DS3 in that group.
Result:
........................................................................................................................................................................................................................
13
Select Line Build Out = In from the drop down window.
........................................................................................................................................................................................................................
14
Select Apply to: All Ports, This Pack
........................................................................................................................................................................................................................
15 Apply
Click
Result:
........................................................................................................................................................................................................................
16
Check off the appropriate box in the
E O
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
6 - 6
LBO Value
IN
OUT
A provisioning page will be displayed.
to issue the command.
All DS3 ports will have a LBO value of In for this pack.
S
F T E P S
Distance (Feet)
Cable Type 735A and
734D
0 - 65 (default)
> 65
"Installation checklist" (p. II-5).
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013