Final Operations - Alcatel-Lucent 1665 Installation Manual

Connecting adjacent network elements
........................................................................................................................................................................
................................................................................................................................................
6 Apply
Click
Result:
was standby is now active. Transmission should take a momentary hit as it is switched
to the other pack. This information should agree with the ACTIVE LEDs on the circuit
packs.
................................................................................................................................................
7
Repeat
pack, with the same results as the previous step.
................................................................................................................................................
8
Repeat this procedure for each function unit pair.
................................................................................................................................................
9
Swap circuit packs from another function group to test any unequipped function slots.
................................................................................................................................................
10
Check off the appropriate box in the
E O
N D
........................................................................................................................................................

Final operations

Description
The following procedure ensures that all test signals and cross-connects have been
removed and the Alcatel-Lucent 1665 DMXtend shelf is alarm free and ready for network
connection procedures.
Steps
................................................................................................................................................
1
Use the
................................................................................................................................................
2
Click the
........................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
.
The pack that was active should now be the standby pack and the pack that
Step 1 through Step 6
S
F T E P S
GUI View > Cross-Connections
command:
Shelf (
Alcatel-Lucent 1665 DMXtend
to verify a switch back to the original function unit circuit
"Installation checklist" (p.
)
.
III-4).
7 - 1 5