Alcatel-Lucent 1665 Installation Manual page 194

Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
2
Connect a cable from the DS-1 test set transmit connection to the IN jack of the DSX-1
associated with the DS-1 tributary to be tested (start with the first).
........................................................................................................................................................................................................................
3
Connect a cable from the DS-1 test set receive connection to the OUT jack of the DSX-1
associated with the DS-1 tributary to be tested (start with the first).
Result:
........................................................................................................................................................................................................................
4
Use the GUI command to enter cross-connects.
........................................................................................................................................................................................................................
5
Click Configuration: Cross-Connections.
........................................................................................................................................................................................................................
6
Select Create a new cross-connection.
........................................................................................................................................................................................................................
7
Select Next.
........................................................................................................................................................................................................................
8
Select Rate= VT1.5: Type of Cross-connect= UPSR Add/Drop.
........................................................................................................................................................................................................................
9
Select Next.
........................................................................................................................................................................................................................
10
Select Range= Single VT.
........................................................................................................................................................................................................................
11
Select m1-1-1-1-1 to a1-1-1-1 (if using a combo card) or [d,g] if using the function slots.
........................................................................................................................................................................................................................
12
Click Finish to issue the command.
Result:
B8ZS formatting.
............................................................................................................................................................................................................................................................
6 - 1 0
The DS-1 test set should indicate a blue (AIS) signal is being received.
The DS-1 test set should indicate it is receiving an error free QRSS signal with
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013