Repair Kits And Tools; Backplane Locations Of Metral™ Pins; Metral™ Pins - Alcatel-Lucent 1665 Installation Manual

Backplane pin replacement
............................................................................................................................................................................................................................................................
Table D-1
DMXtend backplane.
Table D-1 Backplane locations of METRAL™ pins
Row
001, 154, 156, 162
001, 154, 156, 162
All others

Repair kits and tools

Repair kits
For the repair or replacement of METRAL™ signal pins, use one of the following repair
kits:
Berg Electronic MT370-01 Shelf Level Press-Fit Repair Kit
•
IMDARC R-6004 Metral™ Pin Repair Kit - Comcode 407959881
•
This kit includes the tools, parts and instructions for repair and replacement of signal pins.
Replacement pins
Replacement pins are available. These pins are defined by the mating length extending
beyond the inside of the plastic shroud and by their tail length for press-fitting into the
backplane. The tail length includes a compliant press-fit section needed to achieve a gas-
tight connection in four contact areas. All the METRAL™ pins used on the Alcatel-
Lucent 1665 DMXtend shelves have the same tail length of 4.30 mm (0.169 in.).
Additional replacement signal pins may be ordered in packages of 100 by the part number
shown in
Table D-2 Metral™ pins
Type
Ground
Signal Pin
Signal Pin
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
show the location and type of METRAL™ pins on the Alcatel-Lucent 1665
Column
GND
a, b, d, g
All others
Table D-2, "Metral™ pins" (p.
Mating
length (mm)
5.75
5.75
8.00
Mating length
Type (mm)
Signal Pin 5.75
Signal Pin 8.00
Signal Pin 5.75
D-3).
Berg part #
88929-502
88929-502
88929-519
Tail length
(mm)
4.30
4.30
4.30
D- 3