Table of Contents
Advertisement
Chapter 7 Adjustment and initial operation
Clamp lever for adjustment or interlock
Fig. 7-2: Move clamp lever
Spindle adjustments and digital counter
Depending on version, a system provides spindle adjustments with different inclinations. I.
e. at a crank rotation, the spindle slide covers a distance of resp. 2 or 4 mm
No.
1
2
3
4
Record of adjustment values
Adjustments with scales or digital counters simplify the position determination and enable
thus repeatable adjustment for each product charge. For labeling stations with scales or
digital counters, we recommend to maintain a list with „values per product". All relevant
settings should be numbered to ease the assignment of the values.They have then only
be adjusted at product change only at the respective adjustments.
Version: 30.07.14
Description
CLAMP LEVER
CRANK
DIGITAL-COUNTER [mm], 1/10 [mm
NUMBERING OF THE ADJUSTMENT
Page 34 of 57
The most simple kind of adjustment is the
clamping piece with clamp lever (s. Fig. 7-
1, Pos. 6).
If the clamp lever can not be rotated by
360 ° due to shortage of space, it can be
easily moved by being pulled out (s. Fig. 7-
2).
Clamp levers are also used for interlock of
spindle slides (s. Fig. 7-1, Pos. 5). They
will always have to be loosened before
adjustment and then they have to be
tightened again.
Fig. 7-3: Spindle adjustment with digital counter
40001136 Geset 125
GB
Advertisement
Table of Contents
