3Ware 9550SXU-12 User Manual page 76

3ware BIOS Manager (3BM) Introduction
64
•
Incomplete Drives and Others
with missing or failed drives and drives that are not usable.
When some of the drives are remaining from a unit, you can power down
and add the missing drives to complete the unit. To use drives that are
listed here in other units, you must first delete them. For more
information, see "Deleting a Unit" on page 133.
If any of the sections are not shown, it means that there are no items of that
type connected to the controller.
Table 7 lists how to move around and select information in the 3BM screens.
When these commands are available in 3BM, they appear at the bottom of the
3BM screen.
Table 7: Working in 3BM
To do this
Move between units or drives in a list,
between fields, and between buttons
Select (or unselect) what is currently
highlighted.
A selection may be a drive in a list of
drives, a button at the bottom of the
screen, or a field in the middle of the
screen.
In lists, an asterisk appears to the left of
selected drives or units
Display a drop-down list of available
choices in a field
Move between choices in a field list
Select all available drives
In the list of units, expand a selected unit
to see any subunits and drives in the unit,
or contract it to see only the heading
again.
In the list of available drives these keys
also work to show or hide the drives in
each enclosure.
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
lists drives that are remaining from a unit
Use these keys
Up and Down Arrow Keys
OR
Left and Right Arrow Keys
OR
Tab and Shift+Tab
Enter or the Spacebar
Enter
Up and Down Arrow Keys
Alt+A
Shift+
-