Determining What Raid Level To Use - 3Ware 9550SXU-12 User Manual

Sas/sata raid software raid controllers
Table of Contents

Advertisement

Introducing the 3ware® SAS/SATA RAID Controller

Determining What RAID Level to Use

12
Your choice of which type of RAID unit (array) to create will depend on your
needs. You may wish to maximize speed of access, total amount of storage, or
redundant protection of data. Each type of RAID unit offers a different blend
of these characteristics.
The following table provides a brief summary of RAID type characteristics.
Table 3: RAID Configuration Types
RAID Type
Description
RAID 0
Provides performance, but no fault tolerance.
RAID 1
Provides fault tolerance and a read speed advantage over non-
RAID disks.
RAID 5
This type of unit provides performance, fault tolerance, and high
storage efficiency. RAID 5 units can tolerate one drive failing
before losing data.
RAID 6
Provides very high fault tolerance with the ability to protect
against two consecutive drive failures. Performance and
efficiency increase with higher numbers of drives.
RAID 10
A combination of striped and mirrored units for fault tolerance
and high performance.
RAID 50
A combination of RAID 5 and RAID 0. It provides high fault
tolerance and performance.
Single Disk
Not a RAID type, but supported as a configuration.
Provides for maximum disk capacity with no redundancy.
You can create one or more units, depending on the number of drives you
have installed.
Table 4: Possible Configurations Based on Number of Drives
# Drives
Possible RAID Configurations
1
Single disk or hot spare
2
RAID 0 or RAID 1
3
RAID 0
RAID 1 with hot spare
RAID 5
4
RAID 5 with hot spare
RAID 10
Combination of RAID 0, RAID 1, single disk
3ware SAS/SATA RAID Software User Guide, Version 9.5.1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9690sa3ware 9650se

Table of Contents