3Ware 9550SXU-12 User Manual page 122

Configuring Units
110
You are returned to the main 3BM screen.
Note:
The unit is not actually created and no data is overwritten until
you have finished making all your changes and press
12 When you are finished making configuration changes, press
the changes and exit 3BM.
A warning message tells you that all existing data on the drives will be
deleted, and asks you to confirm that you want to proceed.
Figure 53. Confirmation Message when Saving and Exiting
If you made changes to units on more than one controller, the details
about changes about to be made may extend beyond one screen. In this
case, you use the
PgUp
view.
13 Type Y to continue, delete any existing data on the drives, and create the
unit.
14 Partition and format the units, as described under "Partitioning,
Formatting, and Mounting Units" on page 111.
Note:
For RAID 5 and RAID 6 units with 5 or more disks, and RAID
50 units with a subunit of 5 or more disks, initialization of the unit
begins immediately. You can postpone initialization if you want to
begin using the units right away, however initialization from the BIOS
is faster than it is under the operating system, so it will be a longer
period of time until the unit has optimal performance. For more
information, see "About Initialization" on page 158.
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
and keys to bring more information into
PgDn
F8 .
to save
F8