Dcb Version Unsupported; Verify Started - 3Ware 9550SXU-12 User Manual

0028 DCB version unsupported

0029 Verify started

www.3ware.com
Action
If this error occurs, please contact 3ware technical support at
www.3ware.com/support/index.asp
Event Type
Error
Cause
The unit that is connected to your 3ware RAID controller was created on a
legacy 3ware product that is incompatible with your new controller.
During the evolution of the 3ware product line, the format of the Drive
Configuration Block (DCB) has been changed to accommodate new features.
The DCB format expected by the 3ware RAID controller and the DCB that is
written on the drive must be compatible. If they are not, this message is sent.
Action
Return the drives back to their original controller and contact 3ware technical
support at http://www.3ware.com/support/index.asp
Event Type
Information
Cause
The 3ware RAID controller has started verifying the data integrity of a unit.
The verification functions for different RAID levels are as follows:
•
Single and Spare.
• RAID 0. Verify = Media scan
• Verify = Comparison of mirror sides
RAID 1 and 10.
• RAID 5, 6, and 50.
Action
Allow verify to complete to identify any possible data integrity issues.
Error and Notification Messages
for assistance.
Verify = Media scan
Verify = Comparison of parity data with user data
http://
for further assistance.
277