Deleting A Unit Through 3Bm - 3Ware 9550SXU-12 User Manual

Deleting a Unit through 3BM

www.3ware.com
Figure 58. Unit Successfully Deleted through 3DM
In 3BM, the command for deleting a unit is on the main 3BM screen.
To delete a unit through 3BM
1 At the main 3BM screen, select the unit in the list of Exportable Units by
highlighting it and pressing
An asterisk appears in the left-most column to indicate that it is selected.
2 Tab to the Delete Unit
Note:
If you want to delete an incomplete drive or unusable unit, or a
drive that appears with a message such as "Unsupported DCB,"
select it in a similar manner and then select
though it appears in the list
Warning:
Backup any data that you want to keep.
3 On the
Delete Disk Array
make sure it is the one you want to delete.
or
Enter Space
button and press Enter
Incomplete Drives and Others
Any data on the unit will be lost once the unit is deleted.
screen, review the information about the unit to
Deleting a Unit
.
.
Delete Unit
, even
.
135